DGD-2501 155359

The Pentek series of water filters are recognized for their credibility as they have developed experience, knowledge and the methods that are required to satisfy the emerging needs of the water treatment industry. The cartridges that are used in the Pentek DGD-2501 series are 100 percent pure polypropylene fibers and are sized for the use in Big Blue filter housings.

These cartridges are highly efficient and the innovative polypropylene material is used for superior performances. Additionally, the cartridges are constructed specially to provide advanced chemical resistance and are not prone to any bacterial attack. There are two separate gradient density layers that enhance performance of the cartridges.

The DGD 2501 filter has an advanced technological design that is combined with pre filtration and final filtration. This sediment filters have a 25 micron pre filter for fine sediment water filter layer and a 1 micron post filter for extra sediment water filter layer. It is designed in such a way that they can achieve up to three times the holding capacity of dirt of the similar size sediment filter cartridges and many more times than the string-wound or standard spun cartridges. It is only possible due to the two separate layers of gradients in one single filter cartridge.

The larger diameter of the Pentek DGD series pre-filter reduces the particle that is loaded to the post filter and allows it to load at a higher velocity. The depth of this effective filter is increased to a full 233% than other standard spun polypropylene or string-wound filters. Due to the increment in the depth, it has provided higher capacity reduction of particulates efficiently and added the extra capacity of loading. The design that is unique and the performance characteristics that are high have made the DGD series of Pentek filters an excellent choice for the entire rural, residential, commercial and municipal applications.

The Pentek DGD series cartridges are manufactured from 100 % pure polypropylene and are used in Pentek Big Blue housings and most of the other water filters housing for 4-1/2 inch wide x 10 inches height filters. It is easy to install in the house and commercial water filter systems. It is recommended to replace this sediment water filter once every 2 months.

Dimension: 4-1/2 inch x 10 inch 254 mm x 114 mm
Type: Dual Gradient Density
Filter media: Polypropylene
Micron rating: 25 micron pre filter - 1 micron post filter
Temperature rating: 4.4° C to 62.8° C / 40 °F to 145°F


All Filters in this DGD series: