Plekx P10-250-109-096

PLEKx-10 filters are created using activated carbon particles which are fused into a uniform film and are then supported by using light polypropylene non woven webs.

The purified water in a PLEKx 10 filter flows in radial direction (outside to inside), thus they provide increased capacity for dirt-holding and a lower pressure drop. Standard GAC (granular activated carbon) filters may channel or bypass the carbon, which is prevented in Plekx-10 carbon filters due to the extreme uniformity of their extruded activated carbon medium.

Kx Matrikx P10-250-109-096 Plekx Sediment / Carbon water filters are a registered trademark product of formerly KX Industries, LP, known today as Kx Technologies. This company is amongst the world leaders in production of low cost, but high quality extruded activated carbon water filters. The KX Matrikx and Plekx purification products are manufactured in the one of the world's largest, state-of-the-art production facilities.

P10-250-109-096 PLEKX Service life is extended by using depth filtration through multiple layers of spun bonded polypropylene filtration medium. The KX P10250109096 is a dual purpose water filter which offers exceptional cost to performance value. These filters comprise of an effective pre-filtration medium and have an exceptionally high capacity of dirt holding. Its core is made using original Matrikx extruded carbon. The P10-250-109-096 Plekx 10 filters are designed in a manner so that they can be used with water from a high turbidity source. These filters are constructed using a pre-filtration medium which is wrapped around its core, made from extruded carbon. All Plekx filters provide a powerful adsorptive capacity as well as a high dirt holding capability.

The Matrikx P10 250 109 096 carbon filters have many layers of polypropylene pre-filtration outer medium which is designed to hold up fine dust. This filter is ideal for use in RO water systems too. The activated carbon particles in the KX filters are fused together into a uniform block. This enhances the effectiveness and adsorptive capacity of the filter. The Plekx extrusion process allows the production of a carbon-particle laminate with more carbon than conventional PAC spiral-wound filters. Therefore the Plekx10 10 water filter can deliver extended life to the cartridge while removing from water, suspensions, or aqueous solutions, many forms of sediment, chlorine bad taste & odor and organic contaminants.

The Plekx P10-250-109-096 eliminate the release of carbon particulates into the water. They have an outstanding service life and are completely resistant to fouling. They are made using a graded density pre filtration design. These filters are produced using the FDA compliant materials. These filters are designed to fit most standard filter housings. They are capable enough to reduce chlorine taste and odor at the rate of 1 GPM for a flow rate of more than 2,500 gallons of purified water.

The Combination Sediment and Carbon Water Filter. PlekX Sediment, Taste & Odor, Chlorine Reduction Filter; A multifunctional Spiral Wound Sediment/Carbon Filter