OmniPure K2533JJ

Carbon Inline Water Filter for Taste and Odor reduction or as a polishing carbon filter, used as post reverse osmosis water systems. The GAC Granular Activated Carbon is 12 x 40 mesh acid rinsed, provides 18.5 Cubic Inch, filters up to 1500 Gallons or 1 year with John Guest Easy Quick Connect intlet/outlet.

The easy installation and high quality filtration makes this product a sought after one. This series in the water filters is a popular product. The popularity and success of the K series inline filters can be accredited to the unique fittings known as the Quick Connect which have been included in the designing of the product. It is due to the fittings that the installation process is no more a hassle but an issue of few seconds.

The fittings have been moulded in the filter's body and the cap as one unit. It basically reduces the chance of seepage. The body and the cap are combined together to produce a consistent, smooth seal. The patented collet system is used here; there is no requirement for the usage of any binders or glue that may lead to contamination. The end result of such a marvellous production and design is the output of a consistent filter which is not only easy in installation but is also fast.

The product can be mainly used as a system module. The fitting is directly moulded into the cap is a major benefit drawn from this type of design as it helps in the reduction of clearance. All filters are consistently attached. This helps in achieving a greater level of performance in filtering as well as space in a small area.

The K inline filters are generally manufactured in the diameters of two inches or may be two and a half inches. And the length could vary from 6, 8, 10, 12, 14 inches. Fundamentally the systems could also be designed to include different diameters or lengths to meet specified needs of filtration the sizes that are at times intermixed or kept uniform as per the requirement of customers.

This inline filter housing and quick connect fitting are tested for good performance under the NSF Standard 42 for pure drinking water. Tests include 300 psig Hydro Static and Active Cycle Water Testing of 100 Thousand repetitions ranging from 0 up to 150 psig. The results of the quality testing may be obtained through the manufacturer: Omnipure.

Activated carbon GAC water filters are intended not to be used with unsafe microbiologically water or with unknown quality water without the proper disinfection procedures prior or after the water filtration.

Omnipure water filter products are tested under Standard 42 for good taste, improved odor and reduction of chlorine, for particulate reduction, and materials are certified. The water filters shall be installed on lines of cold water only.

These water purification products are a luxury to have as they also offer the after sales service. Omnipure is one brand which promotes such products with the cost effective and reliable functions attached to it. It forms an eminent part of the water treatment systems and its components. The K series of inline filters is a crafted masterpiece to deliver the best at your service. The series is sought after by most part of the commercial industry and is also well received by the residential sector as well.