OmniPure CL6ROT33-B

This inline water filter is preferred because a great deal of plumbing alterations is not needed for its installation. Easy operation and trouble-free filter replacement makes inline Omnipure water filters ideal for use. The filter is made with absolute perfection and precision. Each part including the spring which keeps water at optimum pressure, are made and cut by machine. The components are joined together using the technique of friction. This gives the most accurate results.

Carbon Filters are intended for Taste and Odor removal, Specifically designed for Reverse Osmosis or distillation units. Granular Activated Carbon. The CL6ROT33 B is Same as: Ametek INCF-6, K2333 BB, MicroLine S7206C-06, S7206W CL6RO T33 Filter Length: 6'', NPT 1/4'' female, 5 Micron

Omipure is a filter manufacturing company which shook the world by creating the first disposable, small, inline carbon filter. Ever since then, all filters by this company are designed as a means to remove contaminants, making water free from odor, smell and unwanted taste. The theme of the company is to produce better tasting water. Omnipure filters work on the principle of Point-of-use filtration which is considered to be an ultimate solution for numerable residential as well as commercial applications.

To give us the most satisfying performance, omnipure filter manufacturing goes through a systematic and hardcore engineering process. There are engineers, production supervisors and quality control experts who keenly observe the whole process. The product is tested and re examined to make sure that the products manufactured are up to the specifications indicated. After the manufacturing procedure, many of the filter designs are submitted to NSF for autonomous verification of its performance. Thus the product that is available in market is automatically of the best of standards of the industry.

CL series inline filters have multiple numbers of applications. Basically this filter can be used anywhere where tasty water is wanted. Like in coffee machines or refrigerators or icemakers where there is direct line to the water source, these filters can be easily fixed. It proves to be ideal in protecting such expensive equipment and also proves helpful in getting away with undesirable tastes and odor from water. In industries it is used where excess of sand, silt, dissolved solids and dirt particles are present. CL- Inline water filter by Omnipure helps in converting dirty water into pure water. In beverage industry these filters are not only used to get better tasting water but also to protect their expensive machinery which produces beverage.

Each and every Omnipure Water Filter undergoes rigorous quality testing and independant verification for excellent performance. Each water filter is rated at .5 gallons per minute with a maximum pressure of 125 psi and a maximum hot temperature of 100°F. Every filter cartridge element is rated at 1.0 gallons per minute.

Omnipure water filters products have been tested and listed under Standard 42 (NSF) for taste, odor and chlorine reduction; or outside particulate reduction; or have been materials quality certified. All water filters should be installed on lines with cold water only.

GAC Activated carbon filters are not to be used where the filtered water is unsafe microbiologically or with water that is unknown quality without correct adequate disinfection prior or after the unit.

This Inline Carbon CL6ROT33 B Filter would replace the K2333 BB, MicroLine S7206C-06, S7206W, INCF-6. CL6RO T33 Filter Length is 6 inch, with a NPT 1/4'' female connection, and carbon post filter of about 5 Micron.


Overall, omnipure water filter is ideal for quality water filtration and as a stand-alone device. Aptly speaking, it is one of the most comprehensive filtration systems available in market. It is well accepted in this industry because of its easy installation and very good cost-to-performance ratio.